Mc-leod Line Launch Manuel d'utilisateur télécharger pdf

Line Launch System Installation Instructions

The McLeod Racing Line Launch System will allow you to hold the released clutch at the starting line and

release the clutch when you let pressure off the momentary switch. This system is engineered to operate with

hydraulic clutch linkage only. The purpose of this system is to improve reaction time when drag racing. It is

quicker to release a switch than it is to let your foot off the clutch pedal. The momentary switch included with

this kit is designed to control both the hydraulic throw out bearing/slave cylinder and a Line Lock for the brake

system.

1) Determine a location on the vehicle to mount the Line Launch System. Usually near the master

cylinder for the slave cylinder. The McLeod Line Launch System must be mounted vertically! It cannot

be mounted in a horizontal position! Be sure to leave space for hydraulic lines and electrical

connections. Hard lines or high pressure braided stainless lines are recommended. The Line Launch

system includes AN-4 male fittings.

1 2

Page 1

Line Launch System Installation Instructions The McLeod Racing Line Launch System will allow you to hold the released clutch at the starting line and

Page 2

2) Route a line from the clutch master cylinder to the inlet on the Line Launch (M/C IN). Route another line from the Line Launch (M/C RETURN) to the

Pas de commentaire

Mc-leod Line Launch Manuel d'utilisateur